5 Common Forklift Problems and Fixes
No
matter how rugged and robust forklift trucks are, without a properly trained
and experienced operator they may result in operation failure. Improper
maintenance practices, unprofessional handling & operation, or lack of
knowledge about the vehicle can often lead to problems.
A forklift
truck may encounter issues that if left unaddressed can lead to malfunctioning
or complete failure. So it is vital to spot, understand, and fix potential
issues early.
Here
are the 5 most common forklift problems and how to fix them:
1.
Issues with Ignition
The
health of a diesel forklift engine depends on various factors. If you are
unable to start the vehicle it does not necessarily mean that it needs major
repairs, it can also be something easily fixable. In such a case taking a look
into the following can help:
- Check the fuel level for the Diesel forklift
- In the case of an Electric forklift, take
a look at the battery condition and make sure that the battery is charged.
- Diesel forklift engines tend
to overheat. Check oil and coolant levels and make sure that you have an
adequate amount of both.
If
there are no problems with the power, oil, or coolant levels, it is advised to
call professional help for your Linde Forklift. Keeping a service book with the
maintenance history of the machine always comes in handy.
2.
Issues with Engine Heating
An
overheated engine can cause the diesel forklift to shut down. Excessive heat
also burns the engine oil faster which may lead to the forklift being
non-operational. So it’s important to take a look at the following regularly:
- Keep a check on the coolant
system. Ensure that it is active. Check for the coolant levels.
- Check for blockages and gently
clean the machinery if required.
Apart
from these, if you own a Linde forklift, it is also advised to get in touch with
Linde Service Official so that the problem may be identified immediately and a solution can be provided.
3.
Issues with Steering
Having
an issue with your steering is very dangerous, it makes the forklift truck
prone to errors and in turn, accidents. Consider the following factors to avoid
such incidents:
- Check steering fluid
transmission. A poor flow can affect the ability to switch directions.
- Check wheel alignment.
- Check the condition of the
gears of the steering assembly. Worn-out gears or a rusty steering mechanism
can also cause issues with the steering.
Damaged
or worn-out parts should be replaced with genuine spare parts to prolong the
life of the machine. Contact your nearest Linde Forklift dealer for regular
checkups.
4.
Issues with the Mast
Problems
with the mast or the lift mechanism of the forklift may arise. To reduce the
risks of damaging the goods it is important to resolve the issue straight away.
Contact
your service officer, in case you own a Linde forklift, and get in touch with your
nearest dealer personnel.
5.
Issues with tyres and suspension
Due
to the heavy loading and unloading involved with forklifts, the tyres are bound
to take a toll. Worn-out tyres affect the forklift’s performance and can lead
to problems with driving, stability, and safety. The operator should always
inspect the tyres before using the forklift truck and suggest a replacement
when necessary.
Comments
Post a Comment